Startech 3PT PCIe x4 bővítőkártya - 1 x M.2 PCIe SSD / 2 x M.2 SATA SSD

• Expand the storage and improve the performance of your computer, with slots for two M.2 SATA SSDs and one M.2 PCIe SSD

• Supports PCI Express 3.0 (x4), ideal for a high-performance M.2 PCIe SSD (NVMe)

• SATA slots feature a passthrough design, so your drives can connect to the SATA ports on your host PC

• Full bandwidth is available for each M.2 drive simultaneously (up to approximately 40Gbps for M.2 PCIe drives, and up to 6Gbps for M.2 SATA III drives)

• Wide installation compatibility, with support for a range of M.2 drives (2280, 2260, 2242, 2230)

• Adjustable stand-offs and multiple mounting holes support 80 mm, 60 mm, 42 mm, and 30 mm SSDs

• OS independent with no drivers required, for a fast, hassle-free setup

• Equipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small form-factor computers

• Installs into x4, x8, or x16 PCIe slots

  Hardware
  Bus Type	PCI Express
  Card Type	Standard Profile (LP bracket incl.)
  Industry Standards	Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
  	PCI Express 3.0
  Interface	M.2 SATA (NGFF)
  	SATA
  	M.2 PCIe (NVMe)
  Port Style	Integrated on Card
  Ports	3
  Performance
  ATAPI Support	Yes
  Bootable	Yes
  MTBF	50,000 Hours
  Port Multiplier	No
  RAID	No
  Type and Rate	SATA III (6 Gbps)
  Connector(s)
  Connector Type(s)	1 - PCI Express x4 Male
  Internal Ports	3 - M.2 (NGFF, B-Key) Receptacle
  	2 - SATA (7 pin; Data) Plug
  Software
  OS Compatibility	OS Independent; No additional drivers or software required Note: When installed in a compatible operating system, the card is natively supported and doesn’t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express).
  Special Notes / Requirements
  Note	The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
  System and Cable Requirements	A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot
  	One or two SATA host ports on the host computer (for example, the SATA controller card, or the motherboard SATA ports inside of your computer)
  	An operating system that natively supports PCIe SSDs (NVMe), such as: - Windows® 7 and later - Mac OS 10.10.3 and later
  Indicators
  LED Indicators	3 - M.2 drive status/activity
  	1 - Power
  Environmental
  Humidity	20%~80% RH (Non-condensing)
  Operating Temperature	5°C to 50°C (41°F to 122°F)
  Storage Temperature	-25°C to 70°C (-13°F to 158°F)
  Physical Characteristics
  Product Height	120 mm [4.7 in]
  Product Length	120 mm [4.7 in]
  Product Weight	46 g [1.6 oz]
  Product Width	20 mm [0.8 in]
  Packaging Information
  Shipping (Package) Weight	122 g [4.3 oz]
  What's in the Box
  Included in Package	1 - 3-port M.2 NGFF SSD adapter card
  	1 - low-profile bracket
  	3 - M.2 mounting screws
  	3 - M.2 mounting standoffs
  	3 - M.2 mounting nuts
  	1 - screwdriver
  	1 - quick-start guide

Törekszünk a weboldalon megtalálható pontos és hiteles információk közlésére. Olykor, ezek tartalmazhatnak téves információkat: a képek tájékoztató jellegűek és tartalmazhatnak tartozékokat, amelyek nem szerepelnek az alapcsomagban, egyes leírások vagy az árak előzetes értesítés nélkül megváltozhatnak a gyártók által, vagy hibákat tartalmazhatnak. A jelzett szállítási idők külső tényezők miatt néhány esetben nem teljesülhetnek, nem tekinthetők véglegesnek.